Tips to Protect Your Home From Wildfire
- Actively manage your roof. Clean roof and gutters of pine needles and leaves at least twice a year to eliminate an ignition source for potential fires. This eliminates an ignition source for firebrands, especially during hot, dry weather.
- Beyond the initial 15 feet, thin trees to achieve 10-12 foot crown spacing. Occasionally, clumps of 2 or 3 trees are acceptable for a more natural appearance, if additional space surrounds them.
- Create defensible space on flat ground a minimum of 75 feet around a home. Increase this diameter if the structure is located on a slope.
- Dispose of all slash and debris left from thinning by either chipping, hauling away or piling and burning. Contact your local fire department or local Colorado State Forest Service forester for burning restrictions and/or assistance.
- Mow grasses and weeds to a height of 6 inches or less for a distance of 30 feet from all structures.
- Place liquefied petroleum gas (LPG) containers at least 30 feet from structures. Clear anything flammable, including vegetation, from within 10 feet of all tanks.
- Prune tree branches within the defensible space up to a height of 10 feet above ground.
- Remove shrubs and small trees or other potential ladder fuels from beneath large trees. Left in place, these fuels can carry a ground fire into tree crowns.
- Remove unhealthy vegetation. Trees and shrubs that are stressed, diseased, dead or dying should be removed so that they do not become a fuel source for potential fires.
- Stack firewood away from your house. Locate firewood at least 15 feet uphill from your home. Do not stack firewood under the deck.
- Thin out continuous tree and brush (shrub) cover around structures. Remove flammable vegetation from within the initial 15 feet around structures.
- Trim any branches extending over roofs, and remove branches within 15 feet of chimneys.